Twin Pack: Quartz & Granite Cleaner & Floor Cleaner

Quartz and Granite Cleaner:

• Use neat as supplied, spraying in an even coat direct from the bottle
• Leave 30-40 seconds
• Wipe off excess with a dry soft cotton cloth or kitchen paper towel
• Buff with a fresh dry clean cotton cloth or kitchen paper towel
• To prevent further soiling it is recommended to use a suitable protection treatment from the Rob Parker’s Best Sealer Range
• This is a low hazard product but for safety guidance  please refer to MSDS 

Floor Cleaner:

• For heavily soiled areas use 1 heaped capful of floor cleaner, or for lightly soiled areas use 1/2 capful of product.
• Pour measured floor cleaner into a plastic bucket filled with 10Litres of clean warm water & gently stir until all product is dissolved.
• Apply solution generously with a mop or plastic watering can and leave for 5-15minutes
• Do not allow solution to dry on surface being cleaned.  On large areas the process needs to be carried out in sections
• Use a mop or sponge to clean the surface.  Heavily soiled areas should be gently agitated with a bristle broom
• Repeat application process if necessary & finally rinse the cleaned surface thoroughly with clean water & allow to dry.
• Read a fuller description of the method here
• Storage: Keep container tightly sealed in a cool, dry & well ventilated place
• Always test a small area before use.  Refer to Product Guide for full details
• This is a low hazard product but for safety guidance please refer to MSDS.